 Model Number |
HTS-202 |
APPLICATIONS
- Checking fixture
- Rim moulds, Heat resistant vacuum moulds
- Forming moulds
PROPERTIES
- High compressive strenth
- Good dimensional stability
- Good surface aspect after machining
PHYSICAL PROPERTIES
| |
PART A
|
PART B
|
MIXING
|
| Composition |
BPA
|
ALIPATIC AMINE
|
|
| Mixing ratio by weight |
100
|
100
|
|
| Aspect |
PUTTY
|
PUTTY
|
|
| Color |
BLACK
|
GRAY
|
GRAY
|
| Viscosity at 25°C |
PUTTY
|
PUTTY
|
|
| Density of parts before mixing |
2.5
|
2.5
|
|
| Density of cured mixing |
|
|
2.3~2.5
|
| Pot life at 25°C on 500g (min.) |
|
|
50
|
MECHANICAL PROPERTIES AT 25°C
| Hardness |
KS M 3043-90
|
Shore D
|
90
|
| Flexural strength |
KS M 3015-97
|
kgf/㎟
|
9.5
|
| Tensile strength |
KS M 3015-97
|
kgf/㎟
|
8 ~ 9
|
| Compressive yield strength |
KS M 3015-97
|
kgf/㎟
|
27
|
THERMAL AND SPECIFIC PROPERTIES
| Demoulding time |
|
hrs
|
7
|
| Heat expansion coefficient |
KS M 3015-97
|
1/°C
|
12x10ⁿ(n=-6)
|
PROCESSING CONDITIONS
Both parts must be mixed at temperature above 18°C according to the indicated
mixing ratio.
STORAGE CONDITIONS
Shelf life of both parts is 3 months in a dry place and in their original unopened
containers at temperature between 15 to 25°C. Any open can must be tightly closed.
HANDLING PRECAUTIONS
- Normal health and safety precautions should be observed when handling these
products:
- ensure good ventilation
- wear gloves and safety glasses
- For further information, please consult the product safety data sheet.
|
Related Keywords:
Bookmark / Share this page